Bigtree Mini E3 V2 and BLTouch

Source code and/or compiled binary flash files.
These files will hopefully provide the right binary to cover specific printer configurations and upgrade equipment combinations.
Post Reply
Ender3D
Site Admin
Site Admin
Posts: 28
Joined: Fri Feb 26, 2021 2:22 am

Bigtree Mini E3 V2 and BLTouch

Post by Ender3D »

This is a binary (.bin) file to add BLTouch compatibly with the Bigtree mini E3 V2 32 bit motherboard. Tested and proven to work with this configuration. Thanks to robm1989 for coding and uploading this 8-)

Download the zip file below and unzip to a new folder. Robert has provided a readme.txt and the firmware.bin file ready for flashing. He has also proved the source code files including the modifications. Unless you have experience in modifying such files, we suggest you simply use the .bin file only

Ender 3 Pro Firmware E3 mini V2 WITH BLTOUCH.zip
(68.71 MiB) Downloaded 12 times
You know you've done a good job of uprading your printer when you have some screws and wire left over but it still works! :shock:
Post Reply